: Rotate the INS knob to GROUND (or CV if on a carrier). For faster alignment, select Stored Heading on the HSI page.
: Repeat the process by moving the crank switch to LEFT and advancing the left throttle to IDLE at 25% RPM. 3. Systems Initialization
: Press the Takeoff Trim button and set the flaps switch to HALF . dcs_fa_18c_hornet_episode_3_preflight_startup_t...
This summary covers the essential procedures from the tutorial. It details how to bring the Hornet from a "cold and dark" state to active flight. 1. Preflight and Initial Power
: Ensure the Oxygen (OBOGS) is on, the Ejection Seat is armed, and the Parking Brake is released. : Rotate the INS knob to GROUND (or CV if on a carrier)
: Advance throttles to Military Power (or Full Afterburner). Rotate at approximately 140–150 knots (7 degrees pitch) and retract landing gear and flaps once a positive rate of climb is established.
: Use Nose Wheel Steering (NWS) to navigate to the runway. It details how to bring the Hornet from
: Set the battery switch to ON (Right Console).