How To Setup And Use A Laser Cutter With Rd Works File

Before connecting your hardware, you must install the software and its drivers correctly.

For a more stable connection over long distances, you can configure a static IP address on both your PC and the machine.

Use the cable provided and plug it into the port labeled "PC" on the machine (avoid using the port for USB flash drives). How to setup and use a laser cutter with RD Works

In the setup window, select your language and preferred unit of measurement (mm or inches). 2. Connecting the Machine

Once the software is installed, a menu typically appears to install the USB driver. This step is crucial for your computer to recognize the laser cutter. Before connecting your hardware, you must install the

Once connected, you can start preparing files for your projects. How to setup and use a laser cutter with RD Works

In RDWorks, go to the bottom right settings panel and click "Test." If it says "Port test success," you are ready. 3. Basic Operations in RDWorks In the setup window, select your language and

You can connect your computer to the laser cutter via USB or Ethernet.