: Connect a voltmeter to the main board (Black to MP15 , Red to MP4/MP5 ). Adjust potentiometers P4 or P5 to reach exactly 0.500V (500mV) .
: Check the angle display at 20°, 45°, and 70°. The display must be within ±0.5 degrees of the inclinometer reading. n_031.mp4
This guide covers the assembly and adjustment of core components found in the system's technical manuals. 1. Cable Reel & Length Sensor : Connect a voltmeter to the main board
: Remove old wires from the terminal block and connect the new assembly. n_031.mp4
The angle sensor ensures the crane's boom is at the correct pitch for safe lifting.