Pigeon Induction Stove User Manual May 2026

: Press ON/OFF and wait for the cooling fan to stop before unplugging. Error Codes & Troubleshooting

: Use a fridge magnet; if it sticks to the bottom of your pan, it will work on your Pigeon stove. Pigeon Induction Stove User Manual

: Never block the air entry or exhaust vents. Use a vacuum cleaner periodically to remove dust from these areas to prevent overheating. : Press ON/OFF and wait for the cooling

The plate surface or internal heat sensor is short-circuited. Contact Stovekraft Support . Overheating Use a vacuum cleaner periodically to remove dust

If your stove stops working, it will often display an error code to pinpoint the issue. Common Solution No cookware detected Use magnetic cookware (steel/cast iron) with a flat base ( E1/E2 Low/High Voltage Check your power supply; ensure it is between 85V and 275V. E3/E6 Sensor Issue

: Use the (+) or (-) buttons to change wattage (typically 100W to 1800W) or temperature (80°C to 270°C).

The plate temperature has exceeded 280°C. Let the unit cool for several minutes. Essential Maintenance & Safety

: Press ON/OFF and wait for the cooling fan to stop before unplugging. Error Codes & Troubleshooting

: Use a fridge magnet; if it sticks to the bottom of your pan, it will work on your Pigeon stove.

: Never block the air entry or exhaust vents. Use a vacuum cleaner periodically to remove dust from these areas to prevent overheating.

The plate surface or internal heat sensor is short-circuited. Contact Stovekraft Support . Overheating

If your stove stops working, it will often display an error code to pinpoint the issue. Common Solution No cookware detected Use magnetic cookware (steel/cast iron) with a flat base ( E1/E2 Low/High Voltage Check your power supply; ensure it is between 85V and 275V. E3/E6 Sensor Issue

: Use the (+) or (-) buttons to change wattage (typically 100W to 1800W) or temperature (80°C to 270°C).

The plate temperature has exceeded 280°C. Let the unit cool for several minutes. Essential Maintenance & Safety