Ppg244_s02_082.jpg -

: Create two different sketches at different heights (one slightly offset or scaled) and use a Loft to connect them, naturally creating a tapered wall.

If standard draft tools fail due to "impossible" geometry (e.g., complex curves or zero-thickness intersections), consider these alternative techniques:

: Choose the specific faces you want to taper. Use the Detailed Preview option if available to visualize the direction of the draft. Confirm : Click OK to apply the solid feature to your model. Troubleshooting Complex Geometry ppg244_s02_082.jpg

: In some cases, it is easier to build the drafted faces as surfaces first and then knit them into a solid.

: A more complex option often used for tapered split lines. : Create two different sketches at different heights

To draft a solid feature for a specific part or drawing (like ppg244_s02_082.jpg ), you typically use the tool found in the features toolbar of most CAD software such as SolidWorks or Solid Edge . This feature adds an angle to selected faces of a model, which is essential for parts intended for injection molding or casting to ensure they can be removed from the mold. Standard Workflow for Creating a Draft Feature

: You select a line (usually on the edge where the mold halves meet) that determines w Confirm : Click OK to apply the solid feature to your model

: You select a plane or face that remains stationary, and the draft is applied relative to it.